Why You Should Focus On Enhancing Ghost 2 Immobiliser

Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The revolutionary Ghost immobiliser shields your pride and joy from relay theft and key-longs. With a personalised PIN sequence, unless you know the code your car won't be able to start!

It also has Transport Mode that allows you to disable the device temporarily which is ideal for transport and servicing. The device is then activated by entering a new PIN code.

There are no Key Fobs or Led Indicators

The Ghost 2 immobiliser offers a powerful defence against modern car-theft methods. Its undetectable installation and engine start blockage can reduce the chance of your vehicle being stolen, which could give you peace of mind and could even save you money on insurance premiums.

It isn't detectable by scanners and is not hacked using common methods like key cloning and signal jamming. The device uses existing buttons in your vehicle, such as those on the steering wheel, door panels, and centre console to create a unique, changeable PIN code sequence that is up to 20 presses long. If the correct sequence is entered or if an app or beacon is utilized, only the owner is able to start the engine, providing an extra layer of protection against thieves.

You can also enable the service mode to help in situations such as valet parking or maintenance that require you to temporarily disable the system. This can be done quickly and easily through a mobile app, meaning your vehicle is secure while being worked on. It is easy to revert to secure mode after the work is completed to ensure your vehicle is protected at all times.

The Ghost 2 is far more user-friendly than other systems that require a fob.  similar webpage  can also be used as a spare key in case of emergency. This allows you to drive with your security turned off, without having to enter a PIN code.

No Radio Frequency Signals

In contrast to traditional security systems that have their own separate remote and remote, the Ghost 2 immobiliser doesn't require any additional key fobs or keys and can be used with buttons already on the steering wheel or the centre console. The device is unnoticeable by thieves who employ RFID scanning technology or code grabbing, which means your car will not start for them should they steal your key.

The device locks the engine with an exclusive sequence of buttons. This unique PIN code can be entered through the app or by using the existing buttons on the steering wheel or on the central console. You can also lock the gearbox, so that your car is not able to be driven unless you've got your key or enter your pin code. The device can also be set to Transport mode, which allows you to drive your vehicle without entering the pin code, and also providing your vehicle with additional security when it's left for service or valet parking.

The Ghost 2 immobiliser was designed to be as discreet as it is possible to be as a theft deterrent. This makes it a great option for those who spent many dollars on customizing their vehicles or own expensive or rare cars. Many people have said that the device is an excellent way to prevent their cars from being stolen. Some have even told stories of attempted thefts of cars that were stopped by it. The Ghost 2 is also very versatile. Customers have reported that it works both with their regular keys and with the emergency button on their vehicle, giving them peace-of-mind when they're away from their car.

No Radio Frequency Scanners

Guard your vehicle against hacking, key cloning, and theft by installing the Ghost immobiliser. The system utilises the buttons in your vehicle, like those on your steering wheel and dashboard to create a unique, changeable sequence of buttons that only you can identify. Your car won't start without this sequence. This combination of a unique disarm sequence and the absence of radio frequency signals makes the device difficult to penetrate or bypass.

In contrast to devices which depend on radio frequency scanning the Ghost CAN Immobiliser is completely silent and doesn't require any external signals to work its magic. It is a safer alternative and is insured if installed by an approved installer of TASSA (we are one of them!) ).

Because of the nature and way in which the Ghost immobiliser works with your vehicle, it is recommended that an expert installer complete its installation. This ensures that it is seamlessly integrated into your vehicle systems, resulting in maximum performance and a significantly lower chance of failure.

Professional installation is often supported by warranties and service to further enhance the value of your purchase. This is a major deterrent for potential thieves, who are less likely to attempt to evade the device due to its numerous security features.

As well as being an effective deterrent to thieves As well as a great deterrent to thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly too. It can be configured to automatically re-arm itself after a specific amount of time, which means you don't have to recollect your PIN code each time you park your vehicle. It also allows the flexibility of Service/Valet Mode if you have to hand your vehicle over for servicing or valet parking. It can be turned on or off based on your preference using an easy indication sequence.

No Wire Cutting

The Ghost 2 is non-invasive and does not require any wire cutting during installation. It connects to your vehicle's CAN data networks, and is programmed with a unique PIN code. This blocks anyone else from starting the engine if they don't have a unique sequence of PINs or app authorisation.

The device is also undetectable by the specialised scanning tools that some thieves use and is quiet because it doesn't send out radio signals like other immobilisers. It is weatherproof, sealed and small enough to hide inside the vehicle.

Another benefit of the Ghost II is that it can be turned into "transport mode" for brief intervals without needing an individual PIN sequence. This is great for situations such as lending the car to a friend or family member or in emergency situations which allows you to start your vehicle and drive away quickly and safely.

When installing the Ghost II, it's important to be in a well-lit area and wear safety gear for working with electrical and tool components. A basic set of tools will help you to make precise connections. A multimeter will help check electrical values and make sure that your wiring is safe. Insulation tape and cable ties can be used to secure or rejoin any cut or exposed wires during the installation process.

It is essential to disconnect the battery of your vehicle before beginning any wiring work. This will stop any airbag deployments and electrical shocks in the event that the Ghost II is connected to the vehicle's system while the battery is disconnected.

Easy to Install

The Ghost immobiliser is a unique next generation device that works by connecting directly to the vehicles CAN Data Network and using a personalised PIN Code to stop your vehicle from getting started. This makes it much more difficult to break than traditional alarm systems, or aftermarket key fobs and offers superior security against key cloning hacking as well as relay attacks.

The device can be concealed within your vehicle and utilises the existing buttons on your dashboard and steering wheel to generate a sequence that only you can recognize. This prevents thieves from being able to make use of a key that is cloned to start the car. It also prevents them from using an instrument for diagnosing that thrives on hacking into the OBD.

Installation is easy and does not require cutting wires. The unit connects to the vehicles CAN bus system through identified continuous 12V supply as well as a ground connection. Hand tools of a basic nature are sufficient for the installation process and a multimeter will assist in locating the right wires. To shield the connections from damage, insulation tape or heat shrink tubes are recommended. Cable ties can also be used to keep the wiring neat.

After installation, the unit is in a learning mode, and records your specific sequences of buttons and sequences to generate your unique pin code. The information is stored in the CAN data network, which makes it impossible for anyone else to duplicate the sequence and start your car.

Should you ever forget your PIN Code or sell your car a button become inoperative there is an emergency override function known as Transport Mode. This will turn off the Ghost System completely, but it will automatically reactivate when you go over 31mph for more than 15 minutes, or enter your PIN Code. This is great for those who regularly rent out their vehicles via services such as Turo or ZipCar.